Clamcleat 222 Racing Mini
Clamcleat® CL222 is an elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws or bolts.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 36mm
Length 48mm ; Width 15mm ; Height 21mm
Bolt Size M4 ; Screw Size 4.2
Weight 16gms
Clamcleat 228 Vertical
A compact black nylon cleat with integral fairlead to guide the rope into the teeth. The CL228 is both weather and corrosion proof.
Rope Diameter 6-12mm
Material Nylon
Hole Centres 72mm
Length 114mm ; Width 30mm ; Height 35mm
Bolt Size M6 ; Screw Size 6.3
Weight 68gms
Clamcleat 230 Racing Junior MK1 with roller
The bottom roller of the Clamcleat® CL230 allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Can also be rigged on a rope for 1:1 or 2:1 advantage.
CL230 is ideal for through-deck and through-mast applications. Images show it being used for Cunningham and Kicker controls on an International 14 dinghy. Also for tensioning the sunshade on yachts and powerboats, where the dark grey CL230AN looks good on carbon fibre poles. Allows a round hole to be drilled for the rope.
Rope Diameter 3 - 6mm
Material Aluminium & Nylon
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 23mm
Bolt Size M5 ; Screw Size 4.8
Weight 35gms
Clamcleat 230AN Racing Junior MK1 with roller
The bottom roller of the Clamcleat® CL230 allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Can also be rigged on a rope for 1:1 or 2:1 advantage.
CL230 is ideal for through-deck and through-mast applications. Images show it being used for Cunningham and Kicker controls on an International 14 dinghy. Also for tensioning the sunshade on yachts and powerboats, where the dark grey CL230AN looks good on carbon fibre poles. Allows a round hole to be drilled for the rope. CL230AN has a hard anodised finish to give a harder wearing surface.
Rope Diameter 3 - 6mm
Material Aluminium & Nylon
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 23mm
Bolt Size M5 ; Screw Size 4.8
Weight 35gms
Clamcleat 231 Midi
The Clamcleat® CL231 is a compact black nylon cleat with integral fairlead to guide the rope into the teeth from up to 90 degrees. Same hole centres as CL209 and CL254. Fix with bolts or screws onto flat or curved surfaces.
Rope Diameter 4-8mm
Material Nylon
Hole Centres 54mm
Length 88mm ; Width 22mm ; Height 26mm
Bolt Size M5 (Bolt only) ; Screw Size 4.8mm
Weight 30gms
Clamcleat 236 Mk1 Racing Junior with roller
The roller fairlead on the Clamcleat® CL236 allows ropes to enter the cleat from above.
Rope Diameter 3 - 6mm
Material Aluminium & Nylon
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 25mm
Bolt Size M5 ; Screw Size 4.8
Weight 40gms
Clamcleat 236AN Mk1 Racing Junior with roller
The roller fairlead on the Clamcleat® CL236 allows ropes to enter the cleat from above. CL236AN has a hard anodised finish to give a hard wearing surface.
Rope Diameter 3 - 6mm
Material Aluminium & Nylon
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 25mm
Bolt Size M5 ; Screw Size 4.8
Weight 40gms
Clamcleat 254 Racing Midi
The rope drops down into the teeth of the Clamcleat® CL254 to give a quick and positive lock that is easy to release. Will hold very high loads when used with high quality ropes. Manufactured from aluminium for light weight and durable performance.
Rope Diameter 4 - 8mm
Material Aluminium
Hole Centres 55mm
Length 71mm ; Width 18mm ; Height 27mm
Bolt Size M5 ; Screw Size 4.8
Weight 38gms
Clamcleat 704 Racing Junior Mk1 with Becket
The becket holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Alternatively, the becket can hold shockcord & bungee. No need for extra parts. Ideal for Cunningham adjustment. Use as a deck cleat or fit onto masts, booms and curved surfaces. On the photo of a CL704AN on a Tasar boom, note the sealant used between the cleat and boom, to avoid corrosion.
Manufactured from aluminium for a light weight and durable performance.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 24mm
Bolt Size M5 ; Screw Size 4.8
Weight 34gms
Clamcleat 704AN Racing Junior Mk1 with Becket
The becket holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Alternatively, the becket can hold shockcord & bungee. No need for extra parts. Ideal for Cunningham adjustment. Use as a deck cleat or fit onto masts, booms and curved surfaces. On the photo of a CL704AN on a Tasar boom, note the sealant used between the cleat and boom, to avoid corrosion.
Manufactured from aluminium for a light weight and durable performance the Clamcleat® CL704AN has a hard anodised finish to give a hard wearing surface.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 66mm
Length 82mm ; Width 18mm ; Height 24mm
Bolt Size M5 ; Screw Size 4.8
Weight 34gms
Clamcleat 804 Tapered Pad
Tapered Pads are used to aid rope alignment and easy cleating. Clamcleat® CL804 tapered pad fits under CL201, CL219, CL219AN, CL237 and CL238 cleats. Can be mounted either way round.
Also makes an excellent wedge for holding a door open :-)
Hole Centres 72mm
Length 103mm ; Width 34mm ; Height 21mm
Bolt Size M6
Weight 18gms
Clamcleat 805 Tapered Pad
The Clamcleat® CL805 Tapered Pad is ideal for aligning the cleat that is used to hold a winch tail. CL805 tapered pad fits under CL205, CL220, CL239 and CL240 cleats. Can be mounted either way round.
Hole Centres 95mm
Length 131mm ; Width 45mm ; Height 27mm
Bolt Size M8
Weight 35gms
Clamcleat CL211 MK2/S2 Racing Junior with Becket
The becket on the Clamcleat® CL211 MK2/S2 holds the end of the rope under the cleat. Rig for 2:1 advantage without the need for an extra fixing. Ideal for Optimist masts and small dinghy halyards. Also used for rigging sailboat Lazy Jacks.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 27.4mm
Length 55mm ; Width 16mm ; Height 20mm
Bolt Size M4 ; Screw Size 4.2
Weight 23gms
Clamcleat CL211 MK2AN/S2 Racing Junior with Becket
The becket on the Clamcleat® CL211 MK2/S2 holds the end of the rope under the cleat. Rig for 2:1 advantage without the need for an extra fixing. Ideal for Optimist masts and small dinghy halyards. Also used for rigging sailboat Lazy Jacks. CL211 Mk2AN/S2 has a hard anodised finish to give a hard wearing surface.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 27.4mm
Length 55mm ; Width 16mm ; Height 20mm
Bolt Size M4 ; Screw Size 4.2
Weight 23gms
Clamcleat CL222AN Racing Mini
Clamcleat® CL222 is an elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws or bolts. CL222AN has a hard anodised finish to give a hard wearing surface.
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 36mm
Length 48mm ; Width 15mm ; Height 21mm
Bolt Size M4 ; Screw Size 4.2
Weight 16gms
Clamcleat CL268AN Racing Micros
A small neat, lightweight, strong, alloy cleat with a fairlead. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines); Dinghy control lines; Kitesurfing (5th line adjustment). CL268AN has a hard anodised finish to give the ultimate hard wearing surface. Excellent for extreme coastal conditions.
Rope Diameter 1 - 4mm
Material Aluminium
Hole Centres 24mm
Length 44mm ; Width 13mm ; Height 16mm
Bolt Size M3 ; Screw Size 3
Weight 13gms
Clamcleat CL270 Racing Micros with Becket
The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope. The CL270AN is used on Laser tillers to give a 4:1 advantage without using a pulley block - see photo.
Rope Diameter 1 - 4mm
Material Aluminium
Hole Centres 24mm
Length 44mm ; Width 13mm ; Height 19mm
Bolt Size M3 ; Screw Size 3
Weight 14gms
Clamcleat CL270AN Racing Micros with Becket
The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope. The CL270AN is used on Laser tillers to give a 4:1 advantage without using a pulley block - see photo. CL270AN has a hard anodised finish to give a hard wearing surface.
Rope Diameter 1 - 4mm
Material Aluminium
Hole Centres 24mm
Length 44mm ; Width 13mm ; Height 19mm
Bolt Size M3 ; Screw Size 3
Weight 14gms
Clamcleat CL272 MK2 Junior
A very neat nylon cleat, with a fairlead to guide the rope into the teeth. The CL272 uses advanced tooth technology to hold all types of fibre rope.
Rope Diameter 3 - 6mm
Material Nylon
Hole Centres 27mm
Length 55mm ; Width 16mm ; Height 20mm
Bolt Size M4 ; Screw Size 4.2
Weight 9gms
Trudesign Y-Connector 19mm
Trudesign Y-Connector, fiberglass reinforced nylon. Designed for a hose with a diameter of 19 mm.
Adhesive Numbers and Letters Set (Black)
- 4 x letters A-Z
- 4 x numbers 0-9
- 10 x hyphens
